Alpine - MRP-T222 - V-Power 2/1ch, 90w x 2 or 250w x1
Delivery 2 to 3 days
only £70.99
Alpine - MRP-T222
Features
1/2 Channel Operation
BassEngine®
Subsonic Filter
Bass EQ Circuit
Crossover (HP/LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
Double Buffered Pre-Amp Input Circuitry
STAR Circuitry
MultiMode?
Top Mounted Blue LED Power/Status Indicator
Duo B Feedback Circuitry
Continuously Adjustable Gain Control
Speaker Level Inputs
Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
Cross-Vented Chassis Design
CEA-2006 Power Rating
CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 50W x 2
RMS Power (at 14.4V THD+N, 20Hz-200Hz)
Per channel into 4 ohms: 50W x 2 (0.08% THD)
Per channel into 2 ohms: 70W x 2 (0.3%)
Bridged 4 ohms: 140W x 1 (0.3%)
Total Max. Power: 250W
BassEngine® Sound Tuning
Crossover Network: 18dB/oct
Low/High Pass Crossover Frequency (Fixed): 80Hz
Subsonic Filter (Fixed): 20Hz
Bass EQ Frequency (Fixed): 50Hz
Bass EQ Level (Adjustable): 0 - 12dB
General
Power Requirements: 14.4V DC (11V to 16V)
Frequency Response: 10Hz ? 50kHz (+0, -1dB)
Signal to Noise (S/N): 100dBA (referenced to rated power)
Input Sensitivity (For Rated Power): 0.2V to 4.0V
Slew Factor: Greater than 5
Input Impedance: 10k Ohm
Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
Dimensions (WxHxD): 172mm x 60mm x 267mm
Dimensions (WxHxD): 6-4/5? x 2-2/5" x 10-1/2?
Weight: 1.95 Kg. (4 lbs. 5 oz)
Alpine - MRP-M352
Alpine - MRP-M352 - V-Power, Class D Monobloc, Max 700w x 1 @ 2 Ohms
Delivery 2 to 3 days
only £92.99
Alpine MRP M352
Features
1 Channel Operation
BassEngine®
Subsonic Filter
Bass EQ Circuit
Crossover (LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
Double Buffered Pre-Amp Input Circuitry
STAR Circuitry
Top Mounted Blue LED Power/Status Indicator
Continuously Adjustable Gain Control
Speaker Level Inputs
Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
Cross-Vented Chassis Design
CEA-2006 Power Rating
CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 200x1
RMS Power (at 14.4V THD+N, 20Hz-200Hz)
Per channel into 4 ohms: 200W x 1 (1.0% THD)
Per channel into 2 ohms: 350W x 1 (1.0%)
Total Max. Power: 700W
BassEngine® Sound Tuning
Crossover Network: 18dB/oct
Low Pass Crossover Frequency (Adjustable): 50Hz ? 200 Hz
Subsonic Filter (Fixed): 15Hz @ 24dB/oct.
Bass EQ Frequency (Fixed): 50Hz
Bass EQ Level (Adjustable): 0 - 12dB
General
Power Requirements: 14.4V DC (11V to 16V)
Frequency Response: 20Hz ? 200kHz (+0, -3dB)
Signal to Noise (S/N): 90dBA (referenced to rated power)
Input Sensitivity (For Rated Power): 0.2V to 4.0V
Input Impedance: 10k Ohm
Speaker Impedance: 4 or 2 Ohm (Stereo)
Dimensions (WxHxD): 199mm x 60mm x 267mm
Dimensions (WxHxD): 7-4/5" x 2-2/5" x 10-1/2"
Weight: 2.52 Kg. (5 lbs. 9 oz)
Alpine - MRP-F242
Alpine - MRP-F242 - V-Power 4/3/2 Channel 75w x 4 or 180w x 2
Delivery 2 to 3 days
only £107.00
Alpine - MRP-F242 Car Amplifier
Features
2/3/4 Channel Operation
BassEngine®
Subsonic Filter
Bass EQ Circuit
Crossover (HP/LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
Double Buffered Pre-Amp Input Circuitry
STAR Circuitry
MultiMode?
Top Mounted Blue LED Power/Status Indicator
Duo B Feedback Circuitry
Continuously Adjustable Gain Control
Speaker Level Inputs
Gold Plated Power Screw Terminals
Gold Plated Speaker Terminals
Cross-Vented Chassis Design
CEA-2006 Power Rating
CEA-2006 Power Rating (40hm at 14.4V = 1%THD+N), S/N 60dBA (Ref. 1W into 4Ohm): 40x4
RMS Power (at 14.4V THD+N, 20Hz-200Hz)
Per channel into 4 ohms: 40W x 4 (0.08% THD)
Per channel into 2 ohms: 50W x 4 (0.3%)
Bridged 4 ohms: 100W x 2 (0.3%)
Total Max. Power: 360W
BassEngine® Sound Tuning
Crossover Network: 18dB/oct
Low/High Pass Crossover Frequency (Fixed): 80Hz
Subsonic Filter (Fixed): 20Hz
Bass EQ Frequency (Fixed): 50Hz
Bass EQ Level (Adjustable): 0 - 12dB
General
Power Requirements: 14.4V DC (11V to 16V)
Frequency Response: 10Hz ? 50kHz (+0, -1dB)
Signal to Noise (S/N): 100dBA (referenced to rated power)
Input Sensitivity (For Rated Power): 0.2V to 4.0V
Slew Factor: Greater than 5
Input Impedance: 10k Ohm
Speaker Impedance: 4 or 2 Ohm (Stereo), 4 Ohm (Bridged)
Dimensions (WxHxD): 232mm x 60mm x 267mm
Dimensions (WxHxD): 9-1/5" x 2-2/5" x 10-1/2"
Weight: 2.64 Kg. (5 lbs)
Alpine - MRP-M500
Mono, Max Power Output [@14.4V]: 1 x 1100W, RMS Power Output: 1 x 500W(2O), 1 x 300W(4O), Class-D
Delivery 2 to 3 days
only £121.99
Alpine MRP-M1000
Designed for high performance and value, Alpine's wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.
Power up your system with Alpine's V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.
Mono, Max Power Output [@14.4V]: 1 x 1100W,
RMS Power Output: 1 x 500W(2O), 1 x 300W(4O), Class-D
Alpine - MRP-F300
4 Channels, Max Power Output [@14.4V]: 2 x 320W
Delivery 2 to 3 days
only £121.99
Alpine MRP-F300
Designed for high performance and value, Alpine's wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.
Power up your system with Alpine's V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.
5 Channels, Max Power Output [@14.4V]: 2 x 320W,
RMS Power Output: 4 x 75W(2O), 4 x 50W(4O) CH 3/4 Bridged:, 2 x 150W(4O), Class-A/B
Alpine - MRP-M1000
Mono, Max Power Output [@14.4V]: 1 x 1900W, RMS Power Output: 1 x 1000W(2O), 1 x 600W(4O), Class-D
Delivery 2 to 3 days
only £214.99
Alpine MRP-M1000
Designed for high performance and value, Alpine's wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.
Power up your system with Alpine's V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.
Mono, Max Power Output [@14.4V]: 1 x 1900W,
RMS Power Output: 1 x 1000W(2O), 1 x 600W(4O), Class-D
Alpine - MRP-F600
4 Channels, Max Power Output [@14.4V]: 2 x 660W. RMS
Delivery 2 to 3 days
only £214.99
Alpine MRP-F600
Designed for high performance and value, Alpine's wide selection of sound system solutions provide powerful, high-quality sound for every vehicle.
Power up your system with Alpine's V-Power amplifiers. These amps provide outstanding power output, flexibility and value with a bold, stylish design.
5 Channels, Max Power Output [@14.4V]: 2 x 660W.
RMS Power Output: 4 x 150W(2O), 4 x 100W(4O), CH 3/4 Bridged: 2 x 300W(4O), Class-A/B
Alpine - PDX-2.150
Alpine PDX 2.150 2 x 150w, Class "D", Thermal Management Processor, Star Circuitry, Layered Installation.
Delivery 2 to 3 days
only £250.99
2 x 150w, Class "D", Thermal Management Processor, Star Circuitry, Layered Installation.
General
(SPK Connect)
4Layer Glass Epoxy PC Board
Class-D
Layered Installation
1/2 Channel Operation
Thermal Management Processor
Adjustable Crossover (HP/LP)
MOSFET Power Supply
DC-DC PWM Power Supply
MOSFET Final Outputs
STAR Circuitry
Auto Over-Current Protection
Top Mounted Blue LED Power/Status Indicator
Integrated Wire and Mounting Screw Terminals
One Side Terminal Layout
Gold Plated RCA Input Connectors
Continuously Adjustable Gain Control
Gold Plated Power Screw Terminals
Dimensions: 257mm x 192mm x 62mm
RMS Power
[2ohms @14.4V 1%THD]: 150W x 2
[4ohms @14.4V 1%THD]: 150W x 2
Bass Engine® Sound Tuning
Crossover Frequency Adjustment:
30Hz - 400Hz HP/LP/Off (-12dB/oct)
Alpine - PDX-1.600
Alpine - PDX-1.600 - Mono Power Density Digital Amplifier
Delivery 2 to 3 days
only £250.99
Features
Power Density Ratio Design
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
Switch-mode Digital Amplification
Subsonic Filter (30Hz/50Hz selectable)
S.T.A.R. Circuit
1 Preout
High Temperature Protection
Over Current Protection
Variable Crossover
Layered Installation Capability
Quick Connect Speaker Terminal
Same Power into 2ohms and 4ohms
Power Specification
1500W MAX Power
1 x 600W RMS (2ohms, 14.4V, 1% THD)
1 x 600W RMS (4ohms, 14.4V, 1% THD)
S/N Ratio (IHF A Weighted ) 110dBA
Frequency Response 20Hz - 200Hz (20Hz +/-1dB, 200Hz ?3dB)
Crossover Frequency 50Hz - 200Hz (-24dB/oct)
Input Sensitivity (V/at 10k ohms) 0.1 - 8.0V
Dimensions 257 (W) x 192 (H) x 62 (D) mm
Weight 3.11kg
Alpine - PDX-4.100
4/3/2 CHANNEL POWER DENSITY DIGITAL AMPLIFIER, 4 x 200 W Max, 4 x 100 W RMS
Delivery 2 to 3 days
only £250.99
4/3/2 CHANNEL POWER DENSITY DIGITAL AMPLIFIER, 4 x 200 W Max, 4 x 100 W RMS [2O and 4O@14.4V 1% THD], 2 x 200 W RMS [4O@14.4V BTL 1% THD] Low Resistance, High Current Speaker Terminals
Alpine - PDX-4.150
Alpine PDX 4.150 4 x 150w, Class "D", Thermal Management Processor, Star Circuitry, Layered Installation.
Delivery 2 to 3 days
only £430.99
4 x 150w, Class "D", Thermal Management Processor, Star Circuitry, Layered Installation.
General
(SPK Connect)
4Layer Glass Epoxy PC Board
Class-D
Layered Installation
4/3/2 Channel Operation
Thermal Management Processor
Adjustable Crossover (HP/LP)
MOSFET Power Supply
DC-DC PWM Power Supply
MOSFET Final Outputs
STAR Circuitry
Auto Over-Current Protection
Top Mounted Blue LED Power/Status Indicator
Integrated Wire and Mounting Screw Terminals
Input Channel Selector
Input Mode Selector Switch
One Side Terminal Layout
Gold Plated RCA Input Connectors
Continuously Adjustable Gain Control
Gold Plated Power Screw Terminals
Dimensions: 257mm x 192mm x 62mm
RMS Power
[2ohms @14.4V 1%THD]: 150W x 4
[4ohms @14.4V 1%THD]: 150W x 4
Bass Engine® Sound Tuning
Crossover Frequency Adjustment: 1/2Ch + 3/4Ch, 30Hz-400Hz HP/LP/Off
(-12dB/oct)
Alpine - PDX-1.1000
Alpine PDX 1.1000 1 x 1000w, Class "D", Thermal Management Processor, Star Circuitry, Layered Installation.
Delivery 2 to 3 days
only £502.99
1 x 1000w, Class "D", Thermal Management Processor, Star Circuitry, Layered Installation.
General
(SPK Connect)
4Layer Glass Epoxy PC Board
Class-D
Layered Installation
1 Channel (Mono) Operation
Thermal Management Processor
Subsonic Filter
Adjustable Crossover (LP)
MOSFET Power Supply
DC-DC PWM Power Supply
Discrete Pre-Amp Stage
MOSFET Final Outputs
STAR Circuitry
Auto Over-Current Protection
Top Mounted Blue LED Power/Status Indicator
Integrated Wire and Mounting Screw Terminals
One Side Terminal Layout
Gold Plated RCA Input Connectors
Continuously Adjustable Gain Control
Gold Plated Power Screw Terminals
Non-Fading Pre-Amp Output
Dimensions: 257mm x 192mm x 62mm
RMS Power
[2ohms @14.4V 1%THD]: 1000W x 1 (20Hz - 200Hz)
[4ohms @14.4V 1%THD]: 1000W x 1 (20Hz - 200Hz)
Bass Engine® Sound Tuning
Crossover Frequency Adjustment: 50Hz-200Hz, -24dB oct (LP)
